2. I put down a membrane before laying a concrete base
3. When dry, I began laying the block tiles onto a sand base (as shown in photo)
4. After all the blocks were laid and grouted I applied 2 coats of sealant oil
Plastering and Plaster Repair Service in Margate, Kent and surrounding Areas (01843) 297635
Walls & Ceiling Plastered In Kitchen
Friday, 9 November 2012
Block Tiled Floor
In this project I had to create a floor using old style block tiles in a herringbone pattern:
1. All the rubble was cleared and the area levelled
2. I put down a membrane before laying a concrete base
3. When dry, I began laying the block tiles onto a sand base (as shown in photo)
4. After all the blocks were laid and grouted I applied 2 coats of sealant oil
2. I put down a membrane before laying a concrete base
3. When dry, I began laying the block tiles onto a sand base (as shown in photo)
4. After all the blocks were laid and grouted I applied 2 coats of sealant oil
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment