Plastering a damaged ceiling

When removing the unwanted polystyrene ceiling tiles, it was noticed that there were many hairline cracks on the ceiling. A fibrous mesh scrim was covered over the cracks, PVA (an adhesive/sealant) was applied over the whole area of the ceiling. Then 2 coats of multi-finish plaster was laid to a smooth finish.

                                              www.plastering4u.com

The Art Of Plastering

After years of experience, I can make plastering a wall or ceiling look easy and effortless. When done well, smooth creamy plaster glides onto the surface and dries out evenly and perfectly flat. Hers's the first of 5 top tips that won't turn you into a Master Plasterer overnight, but will make plastering a wall or ceiling less tricky in the future.

 Plastering Tip 1: Ensure your surface is properly prepared before plastering

 Plaster will not adhere securely to any surface that is damp, dusty, wallpapered or unstable without some prior preparation. You must remove any loose areas of existing plaster, dust or paper. Next, the surface must be treated with a mixture of PVA glue and water (this should be 3 parts PVA to 1 water). Allow to dry until the surface becomes tacky, then apply the first coat of plaster.

                                              www.plastering4u.com

 

Repairing and Plastering a Wall

This previously damaged wall has been repaired and plastered. The water damaged plasterboard was removed and replaced. The rest of the wall had PVA (this is an adhesive/sealant) applied. When this had soaked in sufficiently, the wall was plastered to a smooth finish.

                                        www.plastering4u.com